View T500X107K016_5727285.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2063_t500 ? 4/1/2013 1 one world. one kemet benefts ? m eets or exceeds eia standard 535baac ? w eibull failure rate option b ? s tandard gold-plated termination ? r ohs compliant ? o perating temperature range of -55?c to +200?c ? 1 00% steady-state accelerated aging at 200c ? v oltage derating is 1/3 at 200c ? q ualifed at 1,000 hours of life test at 200c with 0.33 v r ? t aped and reeled per eia 481C1 ? m eets msl 1 requirements for pb-free assembly according to jedec jCstdC020 ? su rge current options available overview the kemet t500 series is a high-temperature product that offers optimum performance characteristics in applications with operating temperatures up to 200c. applications typical applications include decoupling and fltering in down- hole, military and aerospace industries. high temperature mno 2 tantalum surface mount capacitors t500 200c rated mno 2 series spice for a detailed analysis of specifc part numbers, please visit www.kemet.com for a free download of kemet's spice software. the kemet spice program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and dc bias conditions. http://www..net/ datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2063_t500 ? 4/1/2013 2 2 high temperature mno 2 tantalum surface mount capacitors C t500 200c rated mno 2 series ordering information t 500 x 227 m 010 a g 61 10 capacitor class series case size capacitance code (pf) capacitance tolerance voltage failure rate/ design lead material performance esr t = tantalum high temperature 200c x first two digits represent signifcant fgures. third digit specifes number of zeros. k = 10% m = 20% 010 = 10 v 016 = 16 v 035 = 35 v a = n/a b= 0.1%/1,000 hours g = gold plated 61 = surge none 62 = surge @ 25c after weibull 63 = surge -55c and +85c after weibull 10 = standard esr performance characteristics item performance characteristics operating temperature -55c to 200c rated capacitance range 33 C 220 f @ 120 hz/25c capacitance tolerance k tolerance (10%), m tolerance (20%) rated voltage range 10 C 35 v df (120 hz) refer to part number electrical specifcation table esr (100 khz) refer to part number electrical specifcation table leakage current 0.01 cv (ma) at rated voltage after 5 minutes http://www..net/ datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2063_t500 ? 4/1/2013 3 3 high temperature mno 2 tantalum surface mount capacitors C t500 200c rated mno 2 series qualifcation test condition characteristics endurance 200c @ 1/3 rated voltage, 1,000 hours c/c within 10% of initial value df within initial limits dcl 1 mamp maximum esr within initial limits storage life 200c @ 0 volts, 1,000 hours c/c within 10% of initial value df within initial limits dcl 1 mamp maximum esr within initial limits humidity 85c, 85% rh, 0 v, 1,000 hours c/c within 10% of initial value df within initial limits dcl within initial limits esr within initial limits temperature stability extreme temperature exposure at a succession of continuous steps at +25c, -55c, +25c, +85c, +125c, +25c +25c -55c +85c +150c c/c i l* 10% 10% 20% df il il 1.5 x il 1.5 x il dcl il n/a 10 x il 12 x il mechanical shock/vibration milCstdC202, method 213, condition i, 100 g peak milCstdC202, method 204, 10 hz to 2,000 hz, 5g's for 20 minutes, 12 cycles each of 3 orientations c/c within 10 of initial value df within initial limits dcl within initial limits *il = initial limit http://www..net/ datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2063_t500 ? 4/1/2013 4 4 high temperature mno 2 tantalum surface mount capacitors C t500 200c rated mno 2 series electrical characteristics impedance & esr vs. frequency capacitance vs. frequency 0.01 0.1 1 10 100 100 1,000 10,000 100,000 1,000,000 10,000,000 impedance & esr (ohms) frequency (hz) T500X107K016 imp T500X107K016 esr t500x227k010 imp t500x227k010 esr t500x336k035 imp t500x336k035 esr 1 10 100 1,000 100 1,000 10,000 100,000 1,000,000 10,000,000 capacitance (f) frequency (hz) T500X107K016 t500x227k010 t500x336k035 http://www..net/ datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2063_t500 ? 4/1/2013 5 5 high temperature mno 2 tantalum surface mount capacitors C t500 200c rated mno 2 series dimensions C millimeters 15 termination cutout at kemet?s option, either end case size component kemet eia l* w* h* f* 0.1 (0.004) s* 0.3 (0.012) b* 0.15 (ref) 0.006 x (ref) p (ref) r (ref) t (ref) a (min) g (ref) e (ref) x 7343C43 7.3 0.3 (0.287 0.012) 4.3 0.3 (0.169 0.012) 4.0 0.3 (0.157 0.012) 2.4 (.095) 1.3 (0.051) 0.5 (.020) 0.10 0.10 (.004 .004) 1.7 (.067) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) notes: (ref) C dimensions provided for reference only. no dimensions are provided for b, p or r because low profle cases do not have a bevel or a notch. * milCprfC55365/8 specifed dimensions table 1 C ratings & part number reference rated v o l t a g e working voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current (v) 85oc @ +125c @ +200c f kemet/eia (see below for part options) a @ 20c max/5 min. a @ 200c, 0.33 v r max/5 min % @ 20oc 120 hz max m @ 20oc 100 khz max (ma) 100 khz, 25c (ma) 100 khz, 125c (ma) 100 khz, 200c 10 6.6 3.3 220 x/7343-43 t500x227(1)010(2)g(3)10 22 220 10 250 812 325 81 16 10.6 5.3 100 x/7343-43 t500x107(1)016(2)g(3)10 16 160 8 250 812 325 81 35 23.1 11.6 33 x/7343-43 t500x336(1)035(2)g(3)10 11.6 116 8 600 524 210 52 (2) to complete kemet part number, insert b (0.1%/1,000 hours) or a = n/a. designates reliability level. http://www..net/ datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2063_t500 ? 4/1/2013 6 6 high temperature mno 2 tantalum surface mount capacitors C t500 200c rated mno 2 series recommended voltage derating guidelines rated voltage working voltage +25c +85c +125c +200c 10 10 10 6.6 3.3 16 16 16 10.6 5.3 35 35 35 23.1 11.6 note: additional reliability can be obtained through the derating of voltage ripple current/ripple voltage kemet case code eia case code maximum power dissipation (p max) mwatts @ 25c with +20c rise x 7343C43 165 temperature compensation multipliers for maximum power dissipation 25c 85c 125c 200c 1.00 0.90 0.40 0.10 t= environmental temperature using the p max of the device, the maximum allowable rms ripple current or voltage may be determined. i(max) = p max/r e(max) = p max*r i = rms ripple current (amperes) e = rms ripple voltage (volts) p max = maximum power dissipation (watts) r = esr at specifed frequency (ohms) 0% 20% 40% 60% 80% 100% 120% -55 25 85 125 175 200 % working voltage temperature ( c) 66% 33% 50% % change in working dc voltage with temperature http://www..net/ datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2063_t500 ? 4/1/2013 7 7 high temperature mno 2 tantalum surface mount capacitors C t500 200c rated mno 2 series reverse voltage solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. the positive terminal is identifed on the capacitor body by a stripe, plus in some cases a beveled edge. a small degree of transient reverse voltage is permissible for short periods per the below table. the capacitors should not be operated continuously in reverse mode, even within these limits. temperature permissible transient reverse voltage 25c 15% of rated voltage 85c 5% of rated voltage 125c 1% of rated voltage table 2 C land dimensions/courtyard kemet metric size code density level a: maximum (most) land protrusion (mm) density level b: median (nominal) land protrusion (mm) density level c: minimum (least) land protrusion (mm) case eia x y c v1 v2 x y c v1 v2 x y c v1 v2 x1 7343C43 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 density level a: for low-density product applications. recommended for wave solder applications and provides a wider process window for refow solder processes. density level b: for products with a moderate level of component density. provides a robust solder attachment condition for refow solder processes. density level c: for high component density product applications. before adapting the minimum land pattern variations the user should perform qualifcation testing based on the conditions outlined in ipc standard 7351 (ipcC7351). 1 height of these chips may create problems in wave soldering. http://www..net/ datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2063_t500 ? 4/1/2013 8 8 high temperature mno 2 tantalum surface mount capacitors C t500 200c rated mno 2 series construction mno 2 / ta 2 o 5 / ta silver adhesive carbon nickel plating washer tantalum wire weld leadframe (- cathode) leadframe (+ anode) time temperature t smin 25oc to peak t l t s 25 t p t smax t l t p maximum ramp up rate = 3oc/seconds maximum ramp down rate = 6oc/seconds soldering process kemets families of surface mount capacitors are compatible with wave (single or dual), convection, ir, or vapor phase refow techniques. preheating of these components is recommended to avoid extreme thermal stress. kemet's recommended profle conditions for convection and ir refow refect the profle conditions of the ipc/jCstdC020d standard for moisture sensitivity testing. the devices can safely withstand a maximum of three refow passes at these conditions. note that although the x/7343C43 case size can withstand wave soldering, the tall profle (4.3 mm maximum) dictates care in wave process development. hand soldering should be performed with care due to the diffculty in process control. if performed, care should be taken to avoid contact of the soldering iron to the molded case. the iron should be used to heat the solder pad, applying solder between the pad and the termination, until refow occurs. once refow occurs, the iron should be removed immediately. wiping the edges of a chip and heating the top surface is not recommended. during typical refow operations, a slight darkening of the gold- colored epoxy may be observed. this slight darkening is normal and not harmful to the product. marking permanency is not affected by this change. profle feature snpb assembly pb-free assembly preheat/soak temperature minimum (t smin ) 100c 150c temperature maximum (t smax ) 150c 200c time (t s ) from t smin to t smax ) 60 C 120 seconds 60 C 120 seconds ramp-up rate (t l to t p ) 3c/seconds maximum 3c/seconds maximum liquidous temperature (t l ) 183c 217c time above liquidous (t l ) 60 C 150 seconds 60 C 150 seconds peak temperature (t p ) 220c* 235c** 250c* 260c** time within 5c of maximum peak temperature (t p ) 20 seconds maximum 30 seconds maximum ramp-down rate (t p to t l ) 6c/seconds maximum 6c/seconds maximum time 25c to peak temperature 6 minutes maximum 8 minutes maximum note: all temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly refow. *case size d, e, p, y, and x **case size a, b, c, h, i, k, m, r, s, t, u, v, w, and z http://www..net/ datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2063_t500 ? 4/1/2013 9 9 high temperature mno 2 tantalum surface mount capacitors C t500 200c rated mno 2 series capacitor marking (h2) high temperature rated voltage 227 10 k 230 h2 polarity indicator (+) picofarad code kemet id date code* * 230 = 30 th week of 2012 date code * 1 st digit = last number of year 9 = 2009 0 = 2010 1 =2011 2 = 2012 3 = 2013 4 =2014 2 nd and 3 rd digit = week of the year 01 = 1 st week of the year to 52 = 52 nd week of the year storage tantalum chip capacitors should be stored in normal working environments. while the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. in addition, packaging materials will be degraded by high temperatureC reels may soften or warp and tape peel force may increase. kemet recommends that maximum storage temperature not exceed 40oc and maximum storage humidity not exceed 60% relative humidity. temperature fuctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. for optimized solderability chip stock should be used promptly, preferably within three years of receipt. http://www..net/ datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2063_t500 ? 4/1/2013 10 10 high temperature mno 2 tantalum surface mount capacitors C t500 200c rated mno 2 series tape & reel packaging information kemets molded tantalum and aluminum chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with eia standard 481C1 : embossed carrier taping of surface mount components for automatic handling. this packaging system is compatible with all tape-fed automatic pick-and-place systems. table 3 C packaging quantity case code tape width (mm) 7" reel* 13" reel* kemet eia i 3216-10 8 3,000 12,000 s 3216-12 8 2,500 10,000 t 3528-12 8 2,500 10,000 m 3528-15 8 2,000 8,000 u 6032-15 12 1,000 5,000 l 6032-19 12 1,000 5,000 w 7343-15 12 1,000 3,000 z 7343-17 12 1,000 3,000 v 7343-20 12 1,000 3,000 a 3216-18 8 2,000 9,000 b 3528-21 8 2,000 8,000 c 6032-28 12 500 3,000 d 7343-31 12 500 2,500 y 7343-40 12 500 2,000 x 7343-43 12 500 2,000 e/t428p 7360-38 12 500 2,000 h 7360-20 12 1,000 2,500 * no c-spec required for 7" reel packaging. c-7280 required for 13" reel packaging. top tape thickness 0.10 mm (0.004") maximum thickness 8 mm (0.315") or 12 mm (0.472") 180 mm (7.0") or 330 mm (13.0") http://www..net/ datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2063_t500 ? 4/1/2013 11 11 high temperature mno 2 tantalum surface mount capacitors C t500 200c rated mno 2 series figure 1 C embossed (plastic) carrier tape dimensions po t f w cent er line s of ca vity ao bo user direction of unre elin g cover tape ko b 1 is for tape feeder reference only, including dra ft concentric abou t b o . t 2 ?d 1 ?do b 1 s 1 t 1 e 1 e 2 p 1 p 2 embossment for c avity size, see note 1 table 4 [10 pitches cumulative tolerance on tape 0.2 mm] table 4 C embossed (plastic) carrier tape dimensions metric will govern constant dimensions millimeters (inches) tape size d 0 d 1 minimum note 1 e 1 p 0 p 2 r reference note 2 s 1 minimum note 3 t maximum t 1 maximum 8 mm 1.5 +0.10/-0.0 (0.059 +0.004/-0.0) 1.0 (0.039) 1.75 0.10 (0.069 0.004) 4.0 0.10 (0.157 0.004) 2.0 0.05 (0.079 0.002) 25.0 (0.984) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) 12 mm 1.5 (0.059) 30 (1.181) 16 mm variable dimensions millimeters (inches) tape size pitch b 1 maximum note 4 e 2 minimum f p 1 t 2 maximum w maximum a 0 ,b 0 & k 0 8 mm single (4 mm) 4.35 (0.171) 6.25 (0.246) 3.5 0.05 (0.138 0.002) 4.0 0.10 (0.157 0.004) 2.5 (0.098) 8.3 (0.327) note 5 12 mm single (4 mm) & double (8 mm) 8.2 (0.323) 10.25 (0.404) 5.5 0.05 (0.217 0.002) 8.0 0.10 (0.315 0.004) 4.6 (0.181) 12.3 (0.484) 16 mm triple (12 mm) 12.1 (0.476) 14.25 (0.561) 5.5 0.05 (0.217 0.002) 8.0 0.10 (0.315 0.004) 4.6 (0.181) 16.3 (0.642) 1. the embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. dimensions of embossment location and hole location shall be applied independent of each other. 2. the tape, with or without components, shall pass around r without damage (see figure 5). 3. if s 1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see eia standard 481Cd, paragraph 4.3, section b). 4. b 1 dimension is a reference dimension for tape feeder clearance only. 5. the cavity def ned by a 0 , b 0 and k 0 shall surround the component with suff cient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes and 10 maximum for 16 mm tapes (see figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see figure 3). (e) see addendum in eia standard 481Cd for standards relating to more precise taping requirements. http://www..net/ datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2063_t500 ? 4/1/2013 12 12 high temperature mno 2 tantalum surface mount capacitors C t500 200c rated mno 2 series packaging information performance notes 1. cover tape break force: 1.0 kg minimum. 2. cover tape peel strength: the total peel strength of the cover tape from the carrier tape shall be: tape width peel strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 newton (10 to 130 gf) the direction of the pull shall be opposite the direction of the carrier tape travel. the pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. during peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. labeling: bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. refer to eia standards 556 and 624 . figure 2 C maximum component rotation ao bo t s max imum c ompon en t rota ti on t op view maxi mum co mponent rotat ion s id e view tape m ax imum width (mm) r otat io n ( t ) 8,12 20 16 ? 200 10 tap e m aximum wid th ( mm) ro tat ion ( s ) 8,12 20 16 ? 56 10 72 ? 200 5 typical pocke t cente r line typical com po nent centerline figure 3 C maximum lateral movement 0.5 mm maxi mum 0.5 mm maxi mum 8 mm & 1 2 mm tape 1.0 mm maxi mum 1.0 mm maxi mum 1 6 mm tape figure 4 C bending radius r r b en ding radius e mbo ssed carrier p unc hed ca rrier http://www..net/ datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2063_t500 ? 4/1/2013 13 13 high temperature mno 2 tantalum surface mount capacitors C t500 200c rated mno 2 series figure 5 C reel dimensions a d (see note) full radi us, see note b (see note) access hole at slot location (? 40 mm minimum) if present, tape slot in core for t ap e start: 2.5 mm minimum width x 10.0 mm minimum depth w 3 (includes flange distortion at outer edge) w 2 (m ea sured at hu b) w 1 (m ea sured at hu b) c (arbor hole diameter) note: drive spokes optional; if used, dimensions b and d shall apply. n table 5 C reel dimensions metric will govern constant dimensions millimeters (inches) tape size a b minimum c d minimum 8 mm 178 0.20 (7.008 0.008) or 330 0.20 (13.000 0.008) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12 mm 16 mm variable dimensions millimeters (inches) tape size n minimum w 1 w 2 maximum w 3 8 mm 50 (1.969) 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 14.4 (0.567) shall accommodate tape width without interference 12 mm 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 18.4 (0.724) 16 mm 16.4 +2.0/-0.0 (0.646 +0.078/-0.0) 22.4 (0.882) http://www..net/ datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2063_t500 ? 4/1/2013 14 14 high temperature mno 2 tantalum surface mount capacitors C t500 200c rated mno 2 series figure 6 C tape leader & trailer dimensions trailer 16 0 mm minimum carrier t ape end start rou nd sp rock et holes el ongated spro ck et holes ( 32 mm tape and wi de r) t op co ve r t ape top c ove r t ape p unche d carrier 8 mm & 12 mm only e mboss ed carrier components 100 mm minimum leader 400 mm minimum figure 7 C maximum camber carrier tape round sprocket holes 1 mm ma ximum , either direction straight edge 250 mm elongated sprocket holes (32 mm & wider ta pe s) http://www..net/ datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2063_t500 ? 4/1/2013 15 15 high temperature mno 2 tantalum surface mount capacitors C t500 200c rated mno 2 series kemet corporation world headquarters 2835 kemet way simpsonville, sc 29681 mailing address: p.o. box 5928 greenville, sc 29606 www.kemet.com tel: 864-963-6300 fax: 864-963-6521 corporate off ces fort lauderdale, fl tel: 954-766-2800 north america southeast lake mary, fl tel: 407-855-8886 northeast wilmington, ma tel: 978-658-1663 central novi, mi tel: 248-994-1030 west milpitas, ca tel: 408-433-9950 mexico guadalajara, jalisco tel: 52-33-3123-2141 europe southern europe paris, france tel: 33-1-4646-1006 sasso marconi, italy tel: 39-051-939111 central europe landsberg, germany tel: 49-8191-3350800 kamen, germany tel: 49-2307-438110 northern europe bishops stortford, united kingdom tel: 44-1279-460122 espoo, finland tel: 358-9-5406-5000 asia northeast asia hong kong tel: 852-2305-1168 shenzhen, china tel: 86-755-2518-1306 beijing, china tel: 86-10-5829-1711 shanghai, china tel: 86-21-6447-0707 taipei, taiwan tel: 886-2-27528585 southeast asia singapore tel: 65-6586-1900 penang, malaysia tel: 60-4-6430200 bangalore, india tel: 91-806-53-76817 note: kemet reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. kemet does not assume any responsibility for infringement that might result from the use of kemet capacitors in potential circuit designs. kemet is a registered trademark of kemet electronics corporation. http://www..net/ datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2063_t500 ? 4/1/2013 16 16 high temperature mno 2 tantalum surface mount capacitors C t500 200c rated mno 2 series other kemet resources tools resource location conf gure a part: capedge http://capacitoredge.kemet.com spice & fit software http://www.kemet.com/spice search our faqs: knowledgeedge http://www.kemet.com/keask electrolytic lifecalculator http://www.kemet.com:8080/elc product information resource location products http://www.kemet.com/products technical resources (including soldering techniques) http://www.kemet.com/technicalpapers rohs statement http://www.kemet.com/rohs quality documents http://www.kemet.com/qualitydocuments product request resource location sample request http://www.kemet.com/sample engineering kit request http://www.kemet.com/kits contact resource location website www.kemet.com contact us http://www.kemet.com/contact investor relations http://www.kemet.com/ir call us 1-877-mykemet twitter http://twitter.com/kemetcapacitors disclaimer all product specif cations, statements, information and data (collectively, the information) are subject to change without notice. all information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute C and we specif cally disclaim C any warranty concerning suitability for a specif c customer application or use. this information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. http://www..net/ datasheet pdf - http://www..net/
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com t 2063_t500 ? 4/1/2013 17 17 high temperature mno 2 tantalum surface mount capacitors C t500 200c rated mno 2 series http://www..net/ datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of T500X107K016

	To Download T500X107K016 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .